Standard models simulate basic functionality of defined plant types from industrial areas with its focus on a clear representation for specific tasks of control engineering. An important advantage of standard models over individual models is that a time- and cost-consuming planning and design phase is rendered unnecessary. Model construction and sensoric/actuator is at all time customisable. This model range is applicable in particular for schoolings in the field of PLC-programming and for presentations. Each model is equipped with 24-V sensors/actuators so that it can be connected up to industrial control systems (PLC, field bus systems).
The connection cables to the control system are not in scope of delivery.
Prices on request.
|
3-Axis-Portal
Article No. 220010
Control requirements:
Digital in-/outputs: 9/7
Counteraccess: 6
Dimensions (l x w x e): 660 x 540 x 450 mm
Weight: 5,7 kg
Data sheet |
|
5-Axis-Robot
Article No. 220026
Control requirements:
Controlsystem is in the model included, circuit board Lynxmotion SSC-32 Servo Controller. Also suitable for self sufficient program executing (Software Lynxmotion SSC-32 Sequencer)
Dimensions (l x w x h): 540 x 390 x 540 mm
Weight:: 4,7 kg
Data sheet |
 |
Elevator, 3 floors
Article No. 220006
Control requirements:
Digital in-/outputs: 26/24
Dimensions (l x w x h): 540 x 390 x 650 mm
Weight: 9,3 kg
Data sheet |
|
Car Wash Line
Article No. 220022
Control requirements:
Digital in-/outputs: 25/20
Dimensions (l x w x h): 1100 x 750 x 600 mm
Weight: 20 kg
Data sheet |
|
Process Cell
Article No. 220015
Control requirements:
Digital in-/outputs: 16/18
Dimensions (l x w x h): 600 x 550 x 330 mm
Weight: 13,4 kg
Data sheet |
|
Process Line
Article No. 220014
Control requirements:
Digital in-/outputs: 15/18
Dimensions (l x w x h): 600 x 550 x 270 mm
Weight: 8,4 kg
Data sheet |
|
Eccentric Press
Article No. 220019
Control requirements:
Digital in-/outputs: 10/3
Dimensions (l x w x h): 390 x 270 x 260 mm
Weight: 2,2 kg
Data sheet |
|
Process Unit with Shuttle
Article No. 220012
Control requirements:
Digital in-/outputs: 20/29
Dimensions (l x w x h): 600 x 550 x 500 mm
Weight: 15 kg
Data sheet |
|
High Level Storage Warehouse
Article No. 220021
Control requirements:
Digital in-/outputs: 26/11
Dimensions (l x w x h): 1290 x 470 x 600 mm
Weight: 20,5 kg
Data sheet |
|
Assembly Line
Article No. 220020
Control requirements:
Digital in-/outputs: 8/7
Dimensions (l x w x h): 675 x 390 x 130 mm
Weight: 7 kg
Data sheet |
|
Parcel Turnover Model
Article No. 220001
Control requirements:
Digital in-/outputs: 10/13
Dimensions (l x w x h): 400 x 400 x 250 mm
Weight: 5,3 kg
Data sheet |
|
Lifting Table
Article No. 220002
Control requirements:
Digital in-/outputs: 4/6
Dimensions (l x w x h): 390 x 270 x 215 mm
Weight: 1,5 kg
Data sheet |
|
Climate Room
Article No. 220013
Control requirements:
Digital in-/outputs: 4/4
Analog in-/outputs: 3/2
Dimensions (l x w x h): 540 x 390 x 350 mm
Weight: 8,4 kg
Data sheet |
|
Flexible Process Line
Article No. 220007
Control requirements:
Digital in-/outputs: 17/17
Dimensions (l x w x h): 860 x 450 x 270 mm
Weight: 12,6 kg
Data sheet |
|
| Flexible Process Line with 3 Axis Portal
Article No. 220008
Control requirements:
Digital in-/outputs: 25/24
Counteraccess: 6
Dimensions (l x w x h): 860 x 450 x 450 mm
Weight: 16 kg
Data sheet |
|
Gate Model
Article No. 220011
Control requirements:
Digital in-/outputs: 10/9
Dimensions (l x w x h): 400 x 350 x 270 mm
Weight: 4,5 kg
Data sheet |
|
Transport and Sorting Line
Article No. 220024
Control requirements:
Digital in-/outputs: 14/6
Dimensions (l x w x h): 520 x 370 x 270 mm
Data sheet |
|
Transport and Sorting Line with 3-Axis Portal
Article No. 220005
Control requirements:
Digital in-/outputs: 25/16
Counteraccess: 6
Dimensions (l x w x h): 800 x 540 x 450 mm
Data sheet |
|
Conveyer Belts
Article No. 220003
Control requirements:
Digital in-/outputs: 5/3
Dimensions (l x w x h): 390 x 270 x 90 mm
Weight: 1,4 kg
Data sheet |
